Every Question
Answered.
Board exam questions from CBSE, ICSE, and all State Boards — answered with AI-structured explanations and community insights.
Effective Use of Pulleys?
In a factory, a 5 kg load is lifted using a pulley system consisting of a single movable pulley with a force of 50 N applied at an angle of 30° to the horizontal. How does the use of a pulley system in this scenario affect the efficiency of the work done in lifting the load compared to lifting it manually without a pulley?
Gravitational Redshift Puzzle?
A laser is emitted from the surface of a celestial body, such as a white dwarf. If this laser signal reaches Earth, its frequency would be observed to be lower than its original frequency. How would the gravitational redshift of light from this celestial body relate to its mass and radius?
A Vehicle Pushed Up a Hill?
A car is being pushed up a 10° incline with a force of 200 N parallel to the slope. If the car's mass is 500 kg and it is moving at a constant speed, determine the force of friction opposing the motion.
Car Crashes: Friction to the Rescue?
In a car crash, friction between the tyres and the road helps in stopping the vehicle. However, if the vehicle is moving with a speed of 30 m/s, will it be possible to stop it within a distance of 20 m without any external assistance? Assume that the coefficient of kinetic friction between the tyres and the road is 0.5.
Motion in a Plane: Identifying the Centre of Mass?
Consider a uniform circular ring of mass 10 kg, with a radius of 0.5 m. A particle of mass 5 kg is placed on the ring at a distance of 0.2 m from its center. What would be the new location of the centre of mass of the system?
Motion in a Plane: A Projectile's Trajectory?
A particle is projected at an angle of 60° to the horizontal with an initial velocity of 20 m/s. If the particle lands 50 m away from the point of projection, what is the time it took to reach the ground, assuming a constant acceleration due to gravity of 9.8 m/s²?
Work Done by a Variable Force?
A 2000 N force is applied to a body, causing it to move from x = 0 to x = 2 m. If the force varies uniformly between 0 N and 2000 N, calculate the work done by the force on the body if it is displaced by 2 meters.
Can a 'perfect' machine exist?
A machine is said to be 'perfect' if it is 100% efficient in converting energy from one form to another. However, according to the second law of thermodynamics, no machine can be 100% efficient. Discuss the implications of this statement and provide a real-life example where the concept of a 'perfect' machine is used.
Gravity on the Moon?
You weigh 600 N on Earth, and it's known that the Moon has only 1/6th of Earth's mass and radius. How would the force of gravitational attraction between you and the Moon compare to that on Earth?
A Racing Car's Braking Action?
A racing car is traveling at 80 m/s when the driver suddenly applies the brakes. Assuming the car's mass is 1500 kg and it comes to rest in 5 seconds, explain how Newton's laws of motion help in understanding the braking action of the car. What is the average force applied by the brakes?
Ramp and Potential Energy?
A block of mass 5 kg is pulled upwards by a force applied at a constant rate on a smooth ramp inclined at an angle of 30°. If the block is displaced by 20 m along the ramp, calculate the work done on the block and explain how it relates to the change in its potential energy.
Relative Motion on a Straight Line?
A train is traveling at 20 m/s relative to the ground. A man inside the train is walking at 5 m/s in the direction of the train. A passerby outside observes the man walking at 5 m/s. If the train is also moving in the same direction as the passerby at 20 m/s, what is the relative speed of the man with respect to the passerby?
Satellite Orbits in Chaos?
A geosynchronous satellite is designed to maintain a stable orbit around the Earth. However, a recent meteorological event causes the Earth's rotation rate to increase by 1%. How would this change affect the satellite's orbit and what adjustments may be needed for it to continue functioning?
Rider's Energy Conundrum?
A bicycle rider on a frictionless surface accelerates from rest for 5 seconds with a constant power of 50 W. Find the distance covered by the rider in the next 10 seconds if she continues to apply the same power but at a speed of 5 m/s.
Car Racing Scenario?
Two cars, one with a mass of 1500 kg and the other with a mass of 2000 kg, are racing on a straight track with the same initial speed of 25 m/s. Assuming the cars accelerate uniformly from the starting line, compare their kinetic energies after covering a distance of 100 meters if the car with the lower mass has a higher acceleration.
A Bullet Train's Rotational Speed?
A bullet train with a length of 200 m is moving at a speed of 120 m/s. If the train's locomotive is equipped with a rotational motion system that allows it to rotate around its central axis at a constant angular speed of 2 rad/s, determine the rotational speed of the rear carriage, assuming the train's rotational motion system is uniform and unchanging.
A Bungee Jumper's Surprise
Rahul, a bungee jumper, jumps from a 200 m high bridge. His bungee cord is designed to stretch by 50 m before releasing the stored elastic potential energy. Calculate the speed with which Rahul hits the water on the ground, given that the centre of mass of his body comes to rest momentarily at 20 m above the ground.
Mass and Gravitational Force?
Suppose a planet with a mass twice that of the Earth is discovered. If a body of mass 100 kg is placed on its surface, how will the gravitational force acting on it compare to the force acting on the same body on the Earth's surface?
Tipping Point of Gyroscope?
A gyroscope is mounted on a frictionless rotating turntable. If the gyroscope's angular velocity is 2 rad/s about its axis of symmetry, and it experiences a torque of 0.5 Nm perpendicular to its axis, determine the minimum angular velocity the turntable must have to prevent the gyroscope from tipping.
A Car's Braking System - Efficiency and Safety?
A car is moving at a speed of 50 m/s when the driver suddenly applies the brakes. The car's mass is 1500 kg. If the brakes are applied uniformly over a distance of 20 m, will the car come to a complete stop? If not, what would be the remaining speed of the car and how does it relate to the coefficient of kinetic friction between the car's tires and the road?
Angular Momentum Conservation in Rotational Motion?
In a laboratory experiment, a top spinning on a string is released from rest when the string's length is halved. Analyze how the angular momentum of the top changes and relate it to the conservation of angular momentum principle.
Relative Velocity Puzzle?
A car A is moving with a uniform velocity of 20 m/s due east. A car B is moving with a uniform velocity of 15 m/s due north. If a bird flying at a velocity of 30 m/s in a direction making an angle of 60° with the horizontal meets car A, explain the relative velocity of the bird with respect to car B.
A Rotating Wheel's Inertia?
A bicycle wheel has a mass of 8 kg and a radius of 0.5 m. It is initially at rest. If a wheel has 50% of its kinetic energy at rotation, calculate the linear velocity of the bicycle's center of mass when the wheel is rotating with an angular velocity of 10 rad/s.
Inclined Plane and Friction?
A block of wood of mass 5 kg is placed on an inclined plane of angle 30°, where the coefficient of kinetic friction is 0.2. If a force of 25 N is applied parallel to the plane, explain the situation with a neat diagram and describe the net force acting on the block in terms of its components.
Momentum Conservation in Collision?
A 5 kg particle is moving with a velocity of 2 m/s east collides with a 3 kg particle moving west at 3 m/s. If the collision is perfectly inelastic, calculate the final velocity of the combined mass and explain the change in the total linear momentum.
Have an academic question?
Stuck on a concept? Ask here — whether it's CBSE, ICSE, competitive exams, or any other subject you're learning. Our community and AI engine will answer with structured, exam-ready explanations.